Rabu, 06 Januari 2010

Speedy is one type of internet connection a lot of current users, this is because the stability and speed are quite adequate for home internet users, although here and there there was also a complaint about the instability and how this leletnya Speedy connections. With speeds up to 384 kbps, so this Speedy connections we can use with several computers at once, or so-called sharing the connection.
For those who have excess money could have bought a router or something to make this Internet connection sharing, but for those who want to maximize what we have, it could be this Speedy internet connection with disharing directly through the CPU, then we can be a server, just with a little tinkering with some option in Windows XP and an existing IP network.

The first step:
Prepare two LAN cards, one for Speedynya connections, one for its local network. Install the two LAN cards, and give the name of each LAN card, to avoid confusion when we tamper with IPnya. For example, we can give a name for the connection speedynya SPEEDY, and LOCAL to the network out to the clientnya.

Step two:
Open the properties of his SPEEDY connection, click the ADVANCED tab, and enable Internet Connection Sharing option, to give an indication of the checklist. Note the IP Address, Subnet Mask, Default Gateway, Preferred DNS Server and Alternate DNS server provided by Telkom on SPEEDY connection.

Step three:Open LOCAL connection properties, and enter the appropriate IP address with a different subnet to subnet the IP address contained in SPEEDY connection, subnet mask would be filled themselves, Default Gateway IP Address adjust with the local connection. While Preferred DNS Server and Alternate DNS Server, completed according to the given Telkom, which is in connection SPEEDY, for example as follows:
LAN Connection 1 for SPEEDY:

* IP Address: 192.168.1.4
* Subnet Mask: 255.255.255.0
* Default Gateway: 192.168.1.1 (or can be left blank)
* Preferred DNS Server: 202.134.1.155
* Alternate DNS Server: 202.134.1.10
LAN connection 2 for LOCAL:

* IP Address: 192.168.0.1
* Subnet Mask: 255.255.255.0
* Default Gateway: 192.168.0.1
* Preferred DNS Server: 202.134.1.155
* Alternate DNS Server: 202.134.1.10

Step four:

Prepare the client CPU is already equipped with LAN cards, then begin to make connections with the open setting properties on the LAN connection is available. Fill in the IP address and so on in accordance with Local Connections have been made of the CPU server, for example:

* IP Address: 192.168.0.2
* Subnet Mask: 255.255.255.0
* Default Gateway: 192.168.0.1
* Preferred DNS Server: 202.134.1.155
* Alternate DNS Server: 202.134.1.10

Done, good luck.
Posting Lebih Baru
Previous
This is the last post.

0 comments:

Posting Komentar

Kritik dan saran sangat berguna bagi saya untuk perbaikan Blog ini,
Terima kasih atas kunjungan anda..